Prepare infrastructure

1. Measure the lawn area, confirm the number and location of speakers, and remove weeds and obstacles on the lawn.

2. Purchase the necessary wires, plugs and other accessories, and prepare the necessary tools and materials according to the design requirements.

3. Reserve spare lines and sockets that may be needed, and ensure that the power output meets the power requirements of the speakers.

Select the speaker location

1. Determine the speaker placement. Consider the sound diffusion effect and avoid setting it on the wall, building corners or too close to the ground.

2. Ensure that the lawn terrain is flat and the ground where the speakers are placed should not be too soft or uneven to avoid affecting the sound quality.

3. Adjust the angle and height of the speaker so that it can hear the best effect while avoiding affecting the passage of pedestrians and vehicles.

Wiring and testing

1. After confirming the speaker location and power output, connect the wires according to the instruction manual. Before connecting, check whether the wires are damaged and aged, and strictly abide by the safety operating procedures.

2. Once the wiring is completed, make sure to ground safely and avoid installing the speaker near a fire source or in a humid environment.

3. Test the sound system and adjust the volume and sound quality parameters to achieve the desired effect.

Precautions

1. Before installation, be sure to read the instruction manual carefully and strictly follow the installation instructions and safety precautions.

2. During use, avoid impact, water and direct sunlight on the speaker.

3. Clean the dust and dirt on the surface of the speaker in time. For speakers that are not used for a long time, you can use packaging materials to protect them to avoid oxidation and aging.

In short, the installation of lawn speakers needs to be carefully considered, from the surrounding environment, power wiring to the effect after debugging. I hope the introduction of this article will be helpful to everyone.